Dental bonding uses tooth-coloured composite resin to repair or reshape selected teeth. At Dr. Kathuria’s Dental Specialties, Dr. Eisha Kathuria assesses enamel, bite and the cause of damage before adding material.
Bonding can be conservative and repairable, but it can stain, chip or wear and is not the right solution for every fracture or gap.
Same-day consultations may be available; call to confirm. Monday–Saturday, 9:30 am–8:00 pm.
Dr. Eisha KathuriaBDS, MDS — Prosthodontics and Crown & Bridge
MaterialTooth-coloured composite resin
ApproachOften additive
UseSelected chips, edges and shapes
MaintenancePolish, repair or replacement
01 · Quick answer
Dental bonding in Tagore Garden: the short answer
Composite bonding adds resin to a tooth to repair a small chip, close a selected space or change an edge or contour. The tooth is cleaned and conditioned so the material can bond, then the resin is shaped, hardened and polished. Suitability depends on remaining tooth structure, bite, colour, moisture control and the reason the tooth changed.
In brief: suitability and design require individual examination.
02 · Overview
What is composite dental bonding?
Dental composite contains resin and filler particles that can be layered in tooth shades. Direct placement allows the dentist to shape the material at the chair without a laboratory stage in many cases.
Minimal preparation does not mean no risk. Margins must be smooth and cleanable, the material must have enough support, and the bite must not overload a thin edge. Larger structural loss may need a different restoration.
03 · Suitability
Who may be suitable for dental bonding in Tagore Garden?
Bonding works best when the proposed addition is supported, cleanable and protected within the bite.
✓
An assessment may proceed when
A small chip or worn edge needs repair
A selected gap or contour can be changed additively
Enough sound enamel remains for bonding
Gums and decay are controlled
The patient accepts stain, wear and repair needs
!
Treatment may need to wait when
A crack or decay extends deeply into the tooth
The bite would repeatedly overload the addition
Major misalignment is better treated orthodontically
Moisture control or enamel support is inadequate
The colour concern may respond to whitening first
Clinical note: this list supports discussion; it does not diagnose suitability.
04 · Compare choices
Dental bonding compared with other options
Monitoring may be appropriate for harmless minor shape differences. Whitening changes natural-tooth shade, orthodontics changes position, and veneers may offer different optical or wear characteristics when justified.
Questions to compare
Polish or monitor a minor defect
Whitening for natural-tooth colour
Orthodontics for spacing or position
Veneer or crown for selected structural needs
Second opinion
Unsure whether bonding or veneers are appropriate?
A second opinion can compare enamel preservation, repairability, colour stability, bite risk and the amount of tooth needing restoration.
The same material can serve different purposes, but the size and location of the addition affect longevity.
Option 1
Edge or chip repair
Composite can rebuild a selected corner or worn edge after the cause and remaining tooth are assessed.
Option 2
Additive contouring
Material may alter width, shape or a small space without extensive tooth preparation.
Option 3
Composite veneer
A wider facial layer can change form or shade but has greater staining, wear and maintenance exposure.
06 · Consultation
Your dental bonding consultation in Tagore Garden
The examination determines whether bonding would treat the cause or merely cover a symptom.
1
Listen
The chip, spacing, colour or shape concern is defined.
2
Examine
Enamel, cracks, decay, gums, bite and habits are checked.
3
Compare
Monitoring, whitening, orthodontic and restorative choices are reviewed.
4
Preview
Colour and proposed additions may be demonstrated where useful.
5
Plan
The bonding area, limitations, maintenance and protection are agreed.
07 · Process
How dental bonding is completed
01
Prepare the tooth
Plaque, decay or unsupported material is managed and the surface is isolated.
02
Select the shade
Composite shades and translucencies are chosen in suitable lighting.
03
Condition and bond
The enamel or dentine is treated with the appropriate adhesive steps.
04
Layer and shape
Composite is added, light-cured and contoured to the planned form.
05
Finish and check
Margins, polish, contacts and bite movements are reviewed.
08 · Recovery
After composite dental bonding
There is usually no surgical recovery, although a treated tooth may feel different while the lips and tongue adapt.
First day
Avoid testing the new edge and report a high or uncomfortable bite.
Daily care
Brush with fluoride toothpaste and clean between teeth carefully.
Habits
Do not bite nails, pens, ice or packaging with bonded teeth.
Maintenance
Attend reviews for polish, margin checks and repair when needed.
Contact the clinic promptly for worsening swelling, persistent bleeding, fever, spreading pain, altered sensation or a loose restoration. Seek urgent medical care for breathing or swallowing difficulty.
09 · Informed consent
Risks and limitations of dental bonding
Composite is repairable but does not behave exactly like natural enamel.
Points discussed before treatment
Chipping, fracture or debonding under load
Staining or loss of surface polish
Wear and gradual change in edge form
Colour mismatch as natural teeth change
Plaque retention or gum irritation at rough margins
Sensitivity or pulpal symptoms if the tooth was already damaged
Need for polishing, repair, replacement or a different restoration
10 · Anatomy
Enamel adhesion, composite thickness and bite
Bonding to sound enamel is generally more reliable than bonding to large areas of dentine or old restorative material. The remaining tooth must also support the addition.
Thin front edges receive forces during biting and side movements. A beautiful static shape can fail if it is too long, unsupported or placed directly in a heavy contact.
11 · Clinical approach
Dental bonding at Dr. Kathuria’s Dental Specialties
01
Cause diagnosed
Trauma, decay, wear and bite are considered before repair.
02
Additive where possible
Healthy tooth tissue is preserved when the design allows.
03
Bite verified
The restoration is checked in functional movements.
04
Repair expected
Future polishing, repair and colour changes are explained.
12 · Your dentist
Meet Dr. Eisha Kathuria for dental bonding in Tagore Garden
Dr. Eisha Kathuria is a prosthodontist with BDS and MDS qualifications in Prosthodontics and Crown & Bridge. Her restorative training is relevant to adhesive dentistry, tooth form, shade selection and bite assessment.
